Section
Drop element here

All The Products

FERRULE-.475 ID NP BRASS is a 1/4
FERRULE-.475 ID NP BRASS is a 1/4
FERRULE-.475 ID NP BRASS is a 1/4
FERRULE-.475 ID NP BRASS is a 1/4
FERRULE-.475 ID NP BRASS is a 1/4
FERRULE-.475 ID NP BRASS is a 1/4
FERRULE-.475 ID NP BRASS is a 1/4
FERRULE-.475 ID NP BRASS is a 1/4

Ferrule-.475 id np brass Taylor #021082

€9,67
FILTER-CORCOM 2VR1 is a 2-stage RFI Power Line 2A general purpose filter, suitable for low impedance loads.
FILTER-CORCOM 2VR1 is a 2-stage RFI Power Line 2A general purpose filter, suitable for low impedance loads.
FILTER-CORCOM 2VR1 is a 2-stage RFI Power Line 2A general purpose filter, suitable for low impedance loads.
FILTER-CORCOM 2VR1 is a 2-stage RFI Power Line 2A general purpose filter, suitable for low impedance loads.

Filter-corcom 2vr1 Taylor #032567

€69,78
FITTING-BARB SYRUP MANIFOLD is used to form the VALVE A.-SYRUP CONTROL for the following models: 5472 & PH61 8634 & PH90*.
FITTING-BARB SYRUP MANIFOLD is used to form the VALVE A.-SYRUP CONTROL for the following models: 5472 & PH61 8634 & PH90*.
FITTING-BARB SYRUP MANIFOLD is used to form the VALVE A.-SYRUP CONTROL for the following models: 5472 & PH61 8634 & PH90*.
FITTING-BARB SYRUP MANIFOLD is used to form the VALVE A.-SYRUP CONTROL for the following models: 5472 & PH61 8634 & PH90*.
FITTING-BARB SYRUP MANIFOLD is used to form the VALVE A.-SYRUP CONTROL for the following models: 5472 & PH61 8634 & PH90*.
FITTING-BARB SYRUP MANIFOLD is used to form the VALVE A.-SYRUP CONTROL for the following models: 5472 & PH61 8634 & PH90*.

Fitting-barb syrup manifold Taylor #050493

€8,79
FITTING-ELBOW SYRUP MANIFOLD is used for KIT A.-SYRUP VALVE,  VALVE A.-SYRUP CONTROL 8634 & PH90, 5472 & PH61.
FITTING-ELBOW SYRUP MANIFOLD is used for KIT A.-SYRUP VALVE,  VALVE A.-SYRUP CONTROL 8634 & PH90, 5472 & PH61.
FITTING-ELBOW SYRUP MANIFOLD is used for KIT A.-SYRUP VALVE,  VALVE A.-SYRUP CONTROL 8634 & PH90, 5472 & PH61.
FITTING-ELBOW SYRUP MANIFOLD is used for KIT A.-SYRUP VALVE,  VALVE A.-SYRUP CONTROL 8634 & PH90, 5472 & PH61.
FITTING-ELBOW SYRUP MANIFOLD is used for KIT A.-SYRUP VALVE,  VALVE A.-SYRUP CONTROL 8634 & PH90, 5472 & PH61.
FITTING-ELBOW SYRUP MANIFOLD is used for KIT A.-SYRUP VALVE,  VALVE A.-SYRUP CONTROL 8634 & PH90, 5472 & PH61.
FITTING-ELBOW SYRUP MANIFOLD is used for KIT A.-SYRUP VALVE,  VALVE A.-SYRUP CONTROL 8634 & PH90, 5472 & PH61.
FITTING-ELBOW SYRUP MANIFOLD is used for KIT A.-SYRUP VALVE,  VALVE A.-SYRUP CONTROL 8634 & PH90, 5472 & PH61.

Fitting-elbow syrup anifold Taylor #050492

€3,87
FITTING-PERISTALTIC PUMP Connects line to pump tube of the following machine models: McDonald's C602, C606.
FITTING-PERISTALTIC PUMP Connects line to pump tube of the following machine models: McDonald's C602, C606.
FITTING-PERISTALTIC PUMP Connects line to pump tube of the following machine models: McDonald's C602, C606.
FITTING-PERISTALTIC PUMP Connects line to pump tube of the following machine models: McDonald's C602, C606.

Fitting-peristaltic pump Taylor #054526

€22,75
FITTING-SYRUP NOSE.125 SLOT is used to form Syrup Line Assembly of model C606.
FITTING-SYRUP NOSE.125 SLOT is used to form Syrup Line Assembly of model C606.
FITTING-SYRUP NOSE.125 SLOT is used to form Syrup Line Assembly of model C606.
FITTING-SYRUP NOSE.125 SLOT is used to form Syrup Line Assembly of model C606.

Fitting-syrup nose.125 slot Taylor #056650

€63,35
FITTING-SYRUP VALVE is used to form Line A.-Syrup Twin Tube of following models: PH61, PH90, 482, 5456, 5461, 5472, 8634, 8663.
FITTING-SYRUP VALVE is used to form Line A.-Syrup Twin Tube of following models: PH61, PH90, 482, 5456, 5461, 5472, 8634, 8663.
FITTING-SYRUP VALVE is used to form Line A.-Syrup Twin Tube of following models: PH61, PH90, 482, 5456, 5461, 5472, 8634, 8663.
FITTING-SYRUP VALVE is used to form Line A.-Syrup Twin Tube of following models: PH61, PH90, 482, 5456, 5461, 5472, 8634, 8663.
FITTING-SYRUP VALVE is used to form Line A.-Syrup Twin Tube of following models: PH61, PH90, 482, 5456, 5461, 5472, 8634, 8663.
FITTING-SYRUP VALVE is used to form Line A.-Syrup Twin Tube of following models: PH61, PH90, 482, 5456, 5461, 5472, 8634, 8663.

Fitting-syrup valve Taylor #053397

€150,20
Flat Adapter Gasket .840X1.06
Flat Adapter Gasket .840X1.06

Flat Adapter Gasket .840X1.06

€0,45
Flavorline Dust Cap-Fb80
Flavorline Dust Cap-Fb80

Flavorline Dust Cap-Fb80

€0,35
The FUSE-15 AMP-IN LINE-NON DELAY #045293 has dimensions of 125 x 70 x 125 mm with a weight of 23 g. Thanks to the advanced technology used in the production of this product, the FUSE-15 AMP-IN LINE -NON DELAY #045293 provides reliable protection against overloads, short circuits, overheating and other damages. It also ensures safe interruption of the power supply in the event of a problem, thus avoiding costly breakdowns and permanent damage.
The FUSE-15 AMP-IN LINE-NON DELAY #045293 has dimensions of 125 x 70 x 125 mm with a weight of 23 g. Thanks to the advanced technology used in the production of this product, the FUSE-15 AMP-IN LINE -NON DELAY #045293 provides reliable protection against overloads, short circuits, overheating and other damages. It also ensures safe interruption of the power supply in the event of a problem, thus avoiding costly breakdowns and permanent damage.
The FUSE-15 AMP-IN LINE-NON DELAY #045293 has dimensions of 125 x 70 x 125 mm with a weight of 23 g. Thanks to the advanced technology used in the production of this product, the FUSE-15 AMP-IN LINE -NON DELAY #045293 provides reliable protection against overloads, short circuits, overheating and other damages. It also ensures safe interruption of the power supply in the event of a problem, thus avoiding costly breakdowns and permanent damage.
The FUSE-15 AMP-IN LINE-NON DELAY #045293 has dimensions of 125 x 70 x 125 mm with a weight of 23 g. Thanks to the advanced technology used in the production of this product, the FUSE-15 AMP-IN LINE -NON DELAY #045293 provides reliable protection against overloads, short circuits, overheating and other damages. It also ensures safe interruption of the power supply in the event of a problem, thus avoiding costly breakdowns and permanent damage.

Fuse-15 amp-in line-non delay Taylor #045293

€6,51
FUSE-15AMP CARTRIDGE is used for 300 Volt Panel Fuse Holder Mt.
FUSE-15AMP CARTRIDGE is used for 300 Volt Panel Fuse Holder Mt.
FUSE-15AMP CARTRIDGE is used for 300 Volt Panel Fuse Holder Mt.
FUSE-15AMP CARTRIDGE is used for 300 Volt Panel Fuse Holder Mt.
FUSE-15AMP CARTRIDGE is used for 300 Volt Panel Fuse Holder Mt.
FUSE-15AMP CARTRIDGE is used for 300 Volt Panel Fuse Holder Mt.

Fuse-15amp cartridge Taylor #027582

€6,55
FUSE-3 AMP.1/4INCH 1 1/4INCH.
FUSE-3 AMP.1/4INCH 1 1/4INCH.
FUSE-3 AMP.1/4INCH 1 1/4INCH.
FUSE-3 AMP.1/4INCH 1 1/4INCH.
FUSE-3 AMP.1/4INCH 1 1/4INCH.
FUSE-3 AMP.1/4INCH 1 1/4INCH.

Fuse-3 amp.1/4inch 1 1/4inch Taylor #076300

€6,00
FUSE-6 AMP  #076301.
FUSE-6 AMP  #076301.
FUSE-6 AMP  #076301.
FUSE-6 AMP  #076301.
FUSE-6 AMP  #076301.
FUSE-6 AMP  #076301.

Fuse-6 amp Taylor #076301

€3,72
GAGE A.-GAP USA QUARTER.
GAGE A.-GAP USA QUARTER.

Gage a.-gap usa quarter Taylor #X79623

€36,29
Freezer door seal for use in Taylor slush machines. GASKET DOOR 5.109 IDX5.630OD used for the following machines: 340, 341, 342, 350, 351, 430, 432 and 450.
Freezer door seal for use in Taylor slush machines. GASKET DOOR 5.109 IDX5.630OD used for the following machines: 340, 341, 342, 350, 351, 430, 432 and 450.
Freezer door seal for use in Taylor slush machines. GASKET DOOR 5.109 IDX5.630OD used for the following machines: 340, 341, 342, 350, 351, 430, 432 and 450.
Freezer door seal for use in Taylor slush machines. GASKET DOOR 5.109 IDX5.630OD used for the following machines: 340, 341, 342, 350, 351, 430, 432 and 450.

Gasket door 5.109 idx5.630od Taylor #014030

€9,75
GASKET-DOOR-HT-4 DOUBLE is used to form the Door A.-Freezer (Long Baffle) of the following models: Plastic-Single Spout *Soft Serve* Heat Treat PH71 Dairy Queen, Plastic-3 Spout *Soft Serve* Non Heat Treat 8756 Dairy Queen, Plastic -3 Spout *Soft Serve* Non Heat Treat 754, 794 TCBY - Domestic (60Hz) - See NOTE for 50Hz, Door A.-Freezer (Short Baffle) Plastic-3 Spout *Soft Serve* Non Heat Treat 336, 337, 338, 339, 8756S, 8784, 8756/Horizon, 8756, 8757.
GASKET-DOOR-HT-4 DOUBLE is used to form the Door A.-Freezer (Long Baffle) of the following models: Plastic-Single Spout *Soft Serve* Heat Treat PH71 Dairy Queen, Plastic-3 Spout *Soft Serve* Non Heat Treat 8756 Dairy Queen, Plastic -3 Spout *Soft Serve* Non Heat Treat 754, 794 TCBY - Domestic (60Hz) - See NOTE for 50Hz, Door A.-Freezer (Short Baffle) Plastic-3 Spout *Soft Serve* Non Heat Treat 336, 337, 338, 339, 8756S, 8784, 8756/Horizon, 8756, 8757.
GASKET-DOOR-HT-4 DOUBLE is used to form the Door A.-Freezer (Long Baffle) of the following models: Plastic-Single Spout *Soft Serve* Heat Treat PH71 Dairy Queen, Plastic-3 Spout *Soft Serve* Non Heat Treat 8756 Dairy Queen, Plastic -3 Spout *Soft Serve* Non Heat Treat 754, 794 TCBY - Domestic (60Hz) - See NOTE for 50Hz, Door A.-Freezer (Short Baffle) Plastic-3 Spout *Soft Serve* Non Heat Treat 336, 337, 338, 339, 8756S, 8784, 8756/Horizon, 8756, 8757.
GASKET-DOOR-HT-4 DOUBLE is used to form the Door A.-Freezer (Long Baffle) of the following models: Plastic-Single Spout *Soft Serve* Heat Treat PH71 Dairy Queen, Plastic-3 Spout *Soft Serve* Non Heat Treat 8756 Dairy Queen, Plastic -3 Spout *Soft Serve* Non Heat Treat 754, 794 TCBY - Domestic (60Hz) - See NOTE for 50Hz, Door A.-Freezer (Short Baffle) Plastic-3 Spout *Soft Serve* Non Heat Treat 336, 337, 338, 339, 8756S, 8784, 8756/Horizon, 8756, 8757.
GASKET-DOOR-HT-4 DOUBLE is used to form the Door A.-Freezer (Long Baffle) of the following models: Plastic-Single Spout *Soft Serve* Heat Treat PH71 Dairy Queen, Plastic-3 Spout *Soft Serve* Non Heat Treat 8756 Dairy Queen, Plastic -3 Spout *Soft Serve* Non Heat Treat 754, 794 TCBY - Domestic (60Hz) - See NOTE for 50Hz, Door A.-Freezer (Short Baffle) Plastic-3 Spout *Soft Serve* Non Heat Treat 336, 337, 338, 339, 8756S, 8784, 8756/Horizon, 8756, 8757.
GASKET-DOOR-HT-4 DOUBLE is used to form the Door A.-Freezer (Long Baffle) of the following models: Plastic-Single Spout *Soft Serve* Heat Treat PH71 Dairy Queen, Plastic-3 Spout *Soft Serve* Non Heat Treat 8756 Dairy Queen, Plastic -3 Spout *Soft Serve* Non Heat Treat 754, 794 TCBY - Domestic (60Hz) - See NOTE for 50Hz, Door A.-Freezer (Short Baffle) Plastic-3 Spout *Soft Serve* Non Heat Treat 336, 337, 338, 339, 8756S, 8784, 8756/Horizon, 8756, 8757.

Gasket-door-ht-4 double Taylor #048926

€18,55
GAUGE-60PSI-1/8MPT FONDO MNT is a pressure regulator gauge, it should be used for the following Manifold models: Manifold A.-Regulator *5456*, 452, 5454/Burger King, 453, 5454, 8657.
GAUGE-60PSI-1/8MPT FONDO MNT is a pressure regulator gauge, it should be used for the following Manifold models: Manifold A.-Regulator *5456*, 452, 5454/Burger King, 453, 5454, 8657.
GAUGE-60PSI-1/8MPT FONDO MNT is a pressure regulator gauge, it should be used for the following Manifold models: Manifold A.-Regulator *5456*, 452, 5454/Burger King, 453, 5454, 8657.
GAUGE-60PSI-1/8MPT FONDO MNT is a pressure regulator gauge, it should be used for the following Manifold models: Manifold A.-Regulator *5456*, 452, 5454/Burger King, 453, 5454, 8657.
GAUGE-60PSI-1/8MPT FONDO MNT is a pressure regulator gauge, it should be used for the following Manifold models: Manifold A.-Regulator *5456*, 452, 5454/Burger King, 453, 5454, 8657.
GAUGE-60PSI-1/8MPT FONDO MNT is a pressure regulator gauge, it should be used for the following Manifold models: Manifold A.-Regulator *5456*, 452, 5454/Burger King, 453, 5454, 8657.
GAUGE-60PSI-1/8MPT FONDO MNT is a pressure regulator gauge, it should be used for the following Manifold models: Manifold A.-Regulator *5456*, 452, 5454/Burger King, 453, 5454, 8657.
GAUGE-60PSI-1/8MPT FONDO MNT is a pressure regulator gauge, it should be used for the following Manifold models: Manifold A.-Regulator *5456*, 452, 5454/Burger King, 453, 5454, 8657.
GAUGE-60PSI-1/8MPT FONDO MNT is a pressure regulator gauge, it should be used for the following Manifold models: Manifold A.-Regulator *5456*, 452, 5454/Burger King, 453, 5454, 8657.
GAUGE-60PSI-1/8MPT FONDO MNT is a pressure regulator gauge, it should be used for the following Manifold models: Manifold A.-Regulator *5456*, 452, 5454/Burger King, 453, 5454, 8657.

Gauge-60psi-1/8mpt bottom mnt Taylor #021029

€12,05
Gear Cartridge Fb80
Gear Cartridge Fb80

Gear Cartridge Fb80

€29,35
GROMMET-ADJUSTMENT-BLACK.
GROMMET-ADJUSTMENT-BLACK.
GROMMET-ADJUSTMENT-BLACK.
GROMMET-ADJUSTMENT-BLACK.

Grommet-adjustment-black Taylor #078217

€3,53
GROMMET-HANDLE-BLACK.
GROMMET-HANDLE-BLACK.
GROMMET-HANDLE-BLACK.
GROMMET-HANDLE-BLACK.

Grommet-handle-black Taylor #075499

€9,35
GUIDE-DRIP SEAL is used for the following models: 702, 741, 772, 336, 430, C602, 104, C712, 340.
GUIDE-DRIP SEAL is used for the following models: 702, 741, 772, 336, 430, C602, 104, C712, 340.
GUIDE-DRIP SEAL is used for the following models: 702, 741, 772, 336, 430, C602, 104, C712, 340.
GUIDE-DRIP SEAL is used for the following models: 702, 741, 772, 336, 430, C602, 104, C712, 340.

Guide-drip seal Taylor #028992

€1,00
HANDLE A.-DRAW It is an operating component of the withdrawal valve assembly, used for the following model: McDonald's C602.
HANDLE A.-DRAW It is an operating component of the withdrawal valve assembly, used for the following model: McDonald's C602.
HANDLE A.-DRAW It is an operating component of the withdrawal valve assembly, used for the following model: McDonald's C602.
HANDLE A.-DRAW It is an operating component of the withdrawal valve assembly, used for the following model: McDonald's C602.
HANDLE A.-DRAW It is an operating component of the withdrawal valve assembly, used for the following model: McDonald's C602.
HANDLE A.-DRAW It is an operating component of the withdrawal valve assembly, used for the following model: McDonald's C602.

Handle a.-draw *c602* Taylor #X56421

€375,60
HANDLE A.-DRAW-WELD is used for the following machines: C706, C707, C708, C709.
HANDLE A.-DRAW-WELD is used for the following machines: C706, C707, C708, C709.
HANDLE A.-DRAW-WELD is used for the following machines: C706, C707, C708, C709.
HANDLE A.-DRAW-WELD is used for the following machines: C706, C707, C708, C709.

Handle a.-draw-weld Taylor #X56246

€89,98
HANDLE VALVE must be inserted inside Door A.-Freezer for the following models: Plastic-3 Spout *Soft Serve* 162, 168.
HANDLE VALVE must be inserted inside Door A.-Freezer for the following models: Plastic-3 Spout *Soft Serve* 162, 168.
HANDLE VALVE must be inserted inside Door A.-Freezer for the following models: Plastic-3 Spout *Soft Serve* 162, 168.
HANDLE VALVE must be inserted inside Door A.-Freezer for the following models: Plastic-3 Spout *Soft Serve* 162, 168.

Handle-draw valve Taylor #030564

€18,21
HARNESS A-COMP.VALVE is used for the following models: C832, C842, L810
HARNESS A-COMP.VALVE is used for the following models: C832, C842, L810
HARNESS A-COMP.VALVE is used for the following models: C832, C842, L810
HARNESS A-COMP.VALVE is used for the following models: C832, C842, L810

Harness a-comp.valve *c842* Taylor #X72743

€27,89
HARNESS A-COMP/TB is a connector for ControlA.-Upper for the C842
HARNESS A-COMP/TB is a connector for ControlA.-Upper for the C842
HARNESS A-COMP/TB is a connector for ControlA.-Upper for the C842
HARNESS A-COMP/TB is a connector for ControlA.-Upper for the C842

Harness a-comp/tb *c842* Taylor #X72854

€27,89
Harness-c602 pyro to shk pers Taylor #059135
Harness-c602 pyro to shk pers Taylor #059135

Harness-c602 pyro to shk pers Taylor #059135

€12,00
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.

Harness-pcb/gr switch *c832* Taylor #072529

€13,98