Section
Drop element here

All The Products

KIT A. TOOL SOLENOID ADJUST it is used to adjust the height of the solenoid.
KIT A. TOOL SOLENOID ADJUST it is used to adjust the height of the solenoid.
KIT A. TOOL SOLENOID ADJUST it is used to adjust the height of the solenoid.
KIT A. TOOL SOLENOID ADJUST it is used to adjust the height of the solenoid.
KIT A. TOOL SOLENOID ADJUST it is used to adjust the height of the solenoid.
KIT A. TOOL SOLENOID ADJUST it is used to adjust the height of the solenoid.

Kit a.-tool solenoid adjust Taylor #X59702

€19,00
KIT A.-TUNE UP *SLUSH* 432 is used for the following models: 340, 341, 342, 350, 351, 430, 432, 450.
KIT A.-TUNE UP *SLUSH* 432 is used for the following models: 340, 341, 342, 350, 351, 430, 432, 450.
KIT A.-TUNE UP *SLUSH* 432 is used for the following models: 340, 341, 342, 350, 351, 430, 432, 450.
KIT A.-TUNE UP *SLUSH* 432 is used for the following models: 340, 341, 342, 350, 351, 430, 432, 450.

Kit a.-tune up *slush* 432 Taylor #X39969

€38,55
KIT A.-TUNE UP is used for models: 103, 104.
KIT A.-TUNE UP is used for models: 103, 104.
KIT A.-TUNE UP is used for models: 103, 104.
KIT A.-TUNE UP is used for models: 103, 104.

Kit a.-tune up*103* Taylor #X33275

€31,75
KIT A.-TUNE UP for models: C300, 346, 349.
KIT A.-TUNE UP for models: C300, 346, 349.
KIT A.-TUNE UP for models: C300, 346, 349.
KIT A.-TUNE UP for models: C300, 346, 349.

Kit a.-tune up*300-346-349 Taylor #X39699

€27,89
Use it for Taylor soft serve machines with old-fashioned freezer doors. Use this door if your machine was manufactured before 1996 and you have not replaced the freezer door. It is used for the following models: 339 & 754 with old style door seal.
Use it for Taylor soft serve machines with old-fashioned freezer doors. Use this door if your machine was manufactured before 1996 and you have not replaced the freezer door. It is used for the following models: 339 & 754 with old style door seal.
Use it for Taylor soft serve machines with old-fashioned freezer doors. Use this door if your machine was manufactured before 1996 and you have not replaced the freezer door. It is used for the following models: 339 & 754 with old style door seal.
Use it for Taylor soft serve machines with old-fashioned freezer doors. Use this door if your machine was manufactured before 1996 and you have not replaced the freezer door. It is used for the following models: 339 & 754 with old style door seal.

Kit a.-tune up*754-339-w/seal* Taylor #X32696

€39,49
KIT A.-TUNE UP-3 SPOUT_NON HT is used for the following machine models: 8757, 8756,8756S.
KIT A.-TUNE UP-3 SPOUT_NON HT is used for the following machine models: 8757, 8756,8756S.
KIT A.-TUNE UP-3 SPOUT_NON HT is used for the following machine models: 8757, 8756,8756S.
KIT A.-TUNE UP-3 SPOUT_NON HT is used for the following machine models: 8757, 8756,8756S.

Kit a.-tune up-3 spout_non ht Taylor #X49463-2

€30,00
KIT A.-UPDATE-YUM TAYLOR X69261 for the model: H62/H63 TAYLOR X69261.
KIT A.-UPDATE-YUM TAYLOR X69261 for the model: H62/H63 TAYLOR X69261.

Kit a.-update-yum *h62/h63* Taylor #X69261

€185,00
KIT TUNE-UP is used for the following models: 761,770.
KIT TUNE-UP is used for the following models: 761,770.
KIT TUNE-UP is used for the following models: 761,770.
KIT TUNE-UP is used for the following models: 761,770.

Kit tune-up Taylor #X33927

€10,00
KIT-CYLINDER SEAL.
KIT-CYLINDER SEAL.
KIT-CYLINDER SEAL.
KIT-CYLINDER SEAL.

Kit-cylinder seal Taylor #076728-AP1

€71,14
KIT-SYRUP VALVE REBUILD is used to repair Line A.-Syrup Twin Tube of the following models: PH61, PH90, 482, 5456, 5461, 5472, 8634, 8663.
KIT-SYRUP VALVE REBUILD is used to repair Line A.-Syrup Twin Tube of the following models: PH61, PH90, 482, 5456, 5461, 5472, 8634, 8663.
KIT-SYRUP VALVE REBUILD is used to repair Line A.-Syrup Twin Tube of the following models: PH61, PH90, 482, 5456, 5461, 5472, 8634, 8663.
KIT-SYRUP VALVE REBUILD is used to repair Line A.-Syrup Twin Tube of the following models: PH61, PH90, 482, 5456, 5461, 5472, 8634, 8663.

Kit-syrup valve rebuild Taylor #053400

€38,79
KIT A.DRAW VALVE *SHAKE is used for the following machines: McDonald's C602, C712.
KIT A.DRAW VALVE *SHAKE is used for the following machines: McDonald's C602, C712.
KIT A.DRAW VALVE *SHAKE is used for the following machines: McDonald's C602, C712.
KIT A.DRAW VALVE *SHAKE is used for the following machines: McDonald's C602, C712.

kKt a.draw valve *shake c602* Taylor #X56200-12

€13,16
LABEL-OPER*15E/22E*.
LABEL-OPER*15E/22E*.

Label-oper*15e/22e* Taylor #079519

€16,19
LABEL-OPERATION is used for the following machine models: McDonald's Intelligap Grills C842, C844.
LABEL-OPERATION is used for the following machine models: McDonald's Intelligap Grills C842, C844.

Label-operation*c842/c844* Taylor #072865

€2,86
Larger Syrup Port O-Ring
Larger Syrup Port O-Ring

Larger Syrup Port O-Ring

€0,12
LEG-4-3/8-16 STUD PLASTIC is used for model 152.
LEG-4-3/8-16 STUD PLASTIC is used for model 152.
LEG-4-3/8-16 STUD PLASTIC is used for model 152.
LEG-4-3/8-16 STUD PLASTIC is used for model 152.

Leg-4-3/8-16 stud plastic Taylor #024755

€8,55
LENZE ERBD047R01K2
LENZE ERBD047R01K2
LENZE ERBD047R01K2
LENZE ERBD047R01K2

LENZE ERBD047R01K2

€100,00
LIGHT-RED-RECT-250V-MIX LOW is a light signal that indicates the minimum level of the product contained inside the tank.
LIGHT-RED-RECT-250V-MIX LOW is a light signal that indicates the minimum level of the product contained inside the tank.
LIGHT-RED-RECT-250V-MIX LOW is a light signal that indicates the minimum level of the product contained inside the tank.
LIGHT-RED-RECT-250V-MIX LOW is a light signal that indicates the minimum level of the product contained inside the tank.

Light-red-rect-250v-mix low Taylor #023056-27

€5,00
LINE A.-AIR 45DEG BARB is used to form MANIFOLD for following machine models: 60, H60, PH61, PH90, 5472, 8634.
LINE A.-AIR 45DEG BARB is used to form MANIFOLD for following machine models: 60, H60, PH61, PH90, 5472, 8634.
LINE A.-AIR 45DEG BARB is used to form MANIFOLD for following machine models: 60, H60, PH61, PH90, 5472, 8634.
LINE A.-AIR 45DEG BARB is used to form MANIFOLD for following machine models: 60, H60, PH61, PH90, 5472, 8634.
LINE A.-AIR 45DEG BARB is used to form MANIFOLD for following machine models: 60, H60, PH61, PH90, 5472, 8634.
LINE A.-AIR 45DEG BARB is used to form MANIFOLD for following machine models: 60, H60, PH61, PH90, 5472, 8634.

Line a.-air 45deg barb Taylor #X47043-12

€56,49
Line Coupler
Line Coupler

Line Coupler

€3,46
LMLDD1275702
LMLDD1275702

LMLDD1275702

€50,00
LMLDD850702
LMLDD850702

LMLDD850702

€40,00
LOW SIDE SOLENOID 230V it is used for Taylor ice cream machines in the following models: C706/C707/C708/C709/C712/C713/C716/C717/C723.
LOW SIDE SOLENOID 230V it is used for Taylor ice cream machines in the following models: C706/C707/C708/C709/C712/C713/C716/C717/C723.
LOW SIDE SOLENOID 230V it is used for Taylor ice cream machines in the following models: C706/C707/C708/C709/C712/C713/C716/C717/C723.
LOW SIDE SOLENOID 230V it is used for Taylor ice cream machines in the following models: C706/C707/C708/C709/C712/C713/C716/C717/C723.

Low side solenoid 230v Taylor #069559-27

€1.840,00
Lower Adaptor O-Ring
Lower Adaptor O-Ring

Lower Adaptor O-Ring

€0,32
The A.-Agitator-Inner Magnet must be assembled on the Housing A.-Agitator *Long* to form the MOTOR A.-AGITATOR w/HOUSING.
The A.-Agitator-Inner Magnet must be assembled on the Housing A.-Agitator *Long* to form the MOTOR A.-AGITATOR w/HOUSING.
The A.-Agitator-Inner Magnet must be assembled on the Housing A.-Agitator *Long* to form the MOTOR A.-AGITATOR w/HOUSING.
The A.-Agitator-Inner Magnet must be assembled on the Housing A.-Agitator *Long* to form the MOTOR A.-AGITATOR w/HOUSING.
The A.-Agitator-Inner Magnet must be assembled on the Housing A.-Agitator *Long* to form the MOTOR A.-AGITATOR w/HOUSING.
The A.-Agitator-Inner Magnet must be assembled on the Housing A.-Agitator *Long* to form the MOTOR A.-AGITATOR w/HOUSING.

Magnet a.-agitator-inner Taylor #X41733

€51,89
Magnet-Catch Assy *C602* Prior to serial number K4091994, use 058630 Latch-Door-Magnetic.
Magnet-Catch Assy *C602* Prior to serial number K4091994, use 058630 Latch-Door-Magnetic.
Magnet-Catch Assy *C602* Prior to serial number K4091994, use 058630 Latch-Door-Magnetic.
Magnet-Catch Assy *C602* Prior to serial number K4091994, use 058630 Latch-Door-Magnetic.
Magnet-Catch Assy *C602* Prior to serial number K4091994, use 058630 Latch-Door-Magnetic.
Magnet-Catch Assy *C602* Prior to serial number K4091994, use 058630 Latch-Door-Magnetic.

Magnet-catch assy *c602* Taylor #016121

€72,98
MICRO SWITCH-PUSH BUTTON-SPST It is used to assemble Motor Mount A. of Model: 810 Series.
MICRO SWITCH-PUSH BUTTON-SPST It is used to assemble Motor Mount A. of Model: 810 Series.
MICRO SWITCH-PUSH BUTTON-SPST It is used to assemble Motor Mount A. of Model: 810 Series.
MICRO SWITCH-PUSH BUTTON-SPST It is used to assemble Motor Mount A. of Model: 810 Series.
MICRO SWITCH-PUSH BUTTON-SPST It is used to assemble Motor Mount A. of Model: 810 Series.
MICRO SWITCH-PUSH BUTTON-SPST It is used to assemble Motor Mount A. of Model: 810 Series.
MICRO SWITCH-PUSH BUTTON-SPST It is used to assemble Motor Mount A. of Model: 810 Series.
MICRO SWITCH-PUSH BUTTON-SPST It is used to assemble Motor Mount A. of Model: 810 Series.

Micro switch-push button-spst Taylor #079442

€9,30
MICRO SWITCH-SH.LEVER-SPDT-10A must be inserted in Bracket-Door Switch, to form Switch A.-Draw, it is used for the following models: Switch A.-Draw 632-710-31-41, 431-441-741-Foot Rod, 441 Door Spinner, 50-1-2, 321-750 Self Closing, 750-1-2, 321-750 Self Closing, *441*Jack/Box, *771*Center, *632* Left (Shake), 702, 430 (See Breakdown).
MICRO SWITCH-SH.LEVER-SPDT-10A must be inserted in Bracket-Door Switch, to form Switch A.-Draw, it is used for the following models: Switch A.-Draw 632-710-31-41, 431-441-741-Foot Rod, 441 Door Spinner, 50-1-2, 321-750 Self Closing, 750-1-2, 321-750 Self Closing, *441*Jack/Box, *771*Center, *632* Left (Shake), 702, 430 (See Breakdown).
MICRO SWITCH-SH.LEVER-SPDT-10A must be inserted in Bracket-Door Switch, to form Switch A.-Draw, it is used for the following models: Switch A.-Draw 632-710-31-41, 431-441-741-Foot Rod, 441 Door Spinner, 50-1-2, 321-750 Self Closing, 750-1-2, 321-750 Self Closing, *441*Jack/Box, *771*Center, *632* Left (Shake), 702, 430 (See Breakdown).
MICRO SWITCH-SH.LEVER-SPDT-10A must be inserted in Bracket-Door Switch, to form Switch A.-Draw, it is used for the following models: Switch A.-Draw 632-710-31-41, 431-441-741-Foot Rod, 441 Door Spinner, 50-1-2, 321-750 Self Closing, 750-1-2, 321-750 Self Closing, *441*Jack/Box, *771*Center, *632* Left (Shake), 702, 430 (See Breakdown).
MICRO SWITCH-SH.LEVER-SPDT-10A must be inserted in Bracket-Door Switch, to form Switch A.-Draw, it is used for the following models: Switch A.-Draw 632-710-31-41, 431-441-741-Foot Rod, 441 Door Spinner, 50-1-2, 321-750 Self Closing, 750-1-2, 321-750 Self Closing, *441*Jack/Box, *771*Center, *632* Left (Shake), 702, 430 (See Breakdown).
MICRO SWITCH-SH.LEVER-SPDT-10A must be inserted in Bracket-Door Switch, to form Switch A.-Draw, it is used for the following models: Switch A.-Draw 632-710-31-41, 431-441-741-Foot Rod, 441 Door Spinner, 50-1-2, 321-750 Self Closing, 750-1-2, 321-750 Self Closing, *441*Jack/Box, *771*Center, *632* Left (Shake), 702, 430 (See Breakdown).

Micro switch-sh.lever-spdt-10a Taylor #028889

€7,97
MOD400X3000
MOD400X3000
MOD400X3000
MOD400X3000
MOD400X3000
MOD400X3000

MOD400X3000

€150,00
123456789101112131415