Section
Drop element here

All The Products

ROD-RELEASE MAT *M 11-12-15* is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
ROD-RELEASE MAT *M 11-12-15* is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
ROD-RELEASE MAT *M 11-12-15* is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
ROD-RELEASE MAT *M 11-12-15* is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.

Rod-release mat *m 11-12-15* Taylor #076155

€26,39
ROD-RELEASE MATERIAL for the model *842*REAR.
ROD-RELEASE MATERIAL for the model *842*REAR.

Rod-release material*842*rear Taylor #073338

€39,51
SAMPLER-SYRUP is used for the following Shake - Syrup Proportioner template.
SAMPLER-SYRUP is used for the following Shake - Syrup Proportioner template.
SAMPLER-SYRUP is used for the following Shake - Syrup Proportioner template.
SAMPLER-SYRUP is used for the following Shake - Syrup Proportioner template.
SAMPLER-SYRUP is used for the following Shake - Syrup Proportioner template.
SAMPLER-SYRUP is used for the following Shake - Syrup Proportioner template.
SAMPLER-SYRUP is used for the following Shake - Syrup Proportioner template.
SAMPLER-SYRUP is used for the following Shake - Syrup Proportioner template.
SAMPLER-SYRUP is used for the following Shake - Syrup Proportioner template.
SAMPLER-SYRUP is used for the following Shake - Syrup Proportioner template.

Sampler-syrup Taylor #045031

€2,73
Sanitizer Pump Cable
Sanitizer Pump Cable

Sanitizer Pump Cable

€52,65
Sanitizer Pump T Connector
Sanitizer Pump T Connector

Sanitizer Pump T Connector

€4,48
This hex head screw is made of high quality steel, which gives it superior strength and durability. It's incredibly light at just 176g, plus, the screw measures 150x100x100mm, making it perfect for all kinds of tasks.
This hex head screw is made of high quality steel, which gives it superior strength and durability. It's incredibly light at just 176g, plus, the screw measures 150x100x100mm, making it perfect for all kinds of tasks.
This hex head screw is made of high quality steel, which gives it superior strength and durability. It's incredibly light at just 176g, plus, the screw measures 150x100x100mm, making it perfect for all kinds of tasks.
This hex head screw is made of high quality steel, which gives it superior strength and durability. It's incredibly light at just 176g, plus, the screw measures 150x100x100mm, making it perfect for all kinds of tasks.
This hex head screw is made of high quality steel, which gives it superior strength and durability. It's incredibly light at just 176g, plus, the screw measures 150x100x100mm, making it perfect for all kinds of tasks.
This hex head screw is made of high quality steel, which gives it superior strength and durability. It's incredibly light at just 176g, plus, the screw measures 150x100x100mm, making it perfect for all kinds of tasks.

Screw -5/16-18x1-1/2 hex head Taylor #01894

€3,50
SCREW GAP ADJUSTER_*M32/35.
SCREW GAP ADJUSTER_*M32/35.
SCREW GAP ADJUSTER_*M32/35.
SCREW GAP ADJUSTER_*M32/35.

Screw gap adjuster_*m32/35 Taylor #079771

€7,99
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.
SCREW-10-32X3/8in RHM-SS #06749 must be inserted inside Hook-Lower Cuprest, to dial Spinner A.-Panel w/Filter of the following models: 300 Series, 400 Series, 632, 700 Series, 5454.

Screw-10-32x3/8in rhm-ss Taylor #06749

€3,50
SCREW-4-40X3/8 SOCKET CAP is used to assemble Syrup Cabinet View, for model C606.
SCREW-4-40X3/8 SOCKET CAP is used to assemble Syrup Cabinet View, for model C606.
SCREW-4-40X3/8 SOCKET CAP is used to assemble Syrup Cabinet View, for model C606.
SCREW-4-40X3/8 SOCKET CAP is used to assemble Syrup Cabinet View, for model C606.
SCREW-4-40X3/8 SOCKET CAP is used to assemble Syrup Cabinet View, for model C606.
SCREW-4-40X3/8 SOCKET CAP is used to assemble Syrup Cabinet View, for model C606.

Screw-4-40x3/8 socket cap Taylor #058317

€3,08
SCREW-4-40X5/8 SOCKET HEAD.
SCREW-4-40X5/8 SOCKET HEAD.
SCREW-4-40X5/8 SOCKET HEAD.
SCREW-4-40X5/8 SOCKET HEAD.
SCREW-4-40X5/8 SOCKET HEAD.
SCREW-4-40X5/8 SOCKET HEAD.

Screw-4-40x5/8 socket head Taylor #0600140

€10,24
SCREW-5/16-18X1-1/2 SOCKET.
SCREW-5/16-18X1-1/2 SOCKET.
SCREW-5/16-18X1-1/2 SOCKET.
SCREW-5/16-18X1-1/2 SOCKET.
SCREW-5/16-18X1-1/2 SOCKET.
SCREW-5/16-18X1-1/2 SOCKET.

Screw-5/16-18x1-1/2 socket Taylor #077829

€0,56
SCREW-8-32X1/2 SOCKET HD is used for Syrup Cabinet View of McDonald's C602 model.
SCREW-8-32X1/2 SOCKET HD is used for Syrup Cabinet View of McDonald's C602 model.
SCREW-8-32X1/2 SOCKET HD is used for Syrup Cabinet View of McDonald's C602 model.
SCREW-8-32X1/2 SOCKET HD is used for Syrup Cabinet View of McDonald's C602 model.
SCREW-8-32X1/2 SOCKET HD is used for Syrup Cabinet View of McDonald's C602 model.
SCREW-8-32X1/2 SOCKET HD is used for Syrup Cabinet View of McDonald's C602 model.

Screw-8-32x1/2 socket hd Taylor #058322

€2,05
SCREW-8-32X5/16 SLTD ROUND is the screw that fixes the Pin-Guide-5/16 OD X 1-5/16 Lg SS for Holder A.-Sensor-Adjustable of the following models: M-8634 s/n J7060000 /up PH90 J7120000/Up, X38976 Holder A.-Sensor Adjustable PH61, 482, 5456, 5472 8663, (8634 Prior to J7060000).
SCREW-8-32X5/16 SLTD ROUND is the screw that fixes the Pin-Guide-5/16 OD X 1-5/16 Lg SS for Holder A.-Sensor-Adjustable of the following models: M-8634 s/n J7060000 /up PH90 J7120000/Up, X38976 Holder A.-Sensor Adjustable PH61, 482, 5456, 5472 8663, (8634 Prior to J7060000).
SCREW-8-32X5/16 SLTD ROUND is the screw that fixes the Pin-Guide-5/16 OD X 1-5/16 Lg SS for Holder A.-Sensor-Adjustable of the following models: M-8634 s/n J7060000 /up PH90 J7120000/Up, X38976 Holder A.-Sensor Adjustable PH61, 482, 5456, 5472 8663, (8634 Prior to J7060000).
SCREW-8-32X5/16 SLTD ROUND is the screw that fixes the Pin-Guide-5/16 OD X 1-5/16 Lg SS for Holder A.-Sensor-Adjustable of the following models: M-8634 s/n J7060000 /up PH90 J7120000/Up, X38976 Holder A.-Sensor Adjustable PH61, 482, 5456, 5472 8663, (8634 Prior to J7060000).
SCREW-8-32X5/16 SLTD ROUND is the screw that fixes the Pin-Guide-5/16 OD X 1-5/16 Lg SS for Holder A.-Sensor-Adjustable of the following models: M-8634 s/n J7060000 /up PH90 J7120000/Up, X38976 Holder A.-Sensor Adjustable PH61, 482, 5456, 5472 8663, (8634 Prior to J7060000).
SCREW-8-32X5/16 SLTD ROUND is the screw that fixes the Pin-Guide-5/16 OD X 1-5/16 Lg SS for Holder A.-Sensor-Adjustable of the following models: M-8634 s/n J7060000 /up PH90 J7120000/Up, X38976 Holder A.-Sensor Adjustable PH61, 482, 5456, 5472 8663, (8634 Prior to J7060000).

Screw-8-32x5/16 sltd round Taylor #017552

€0,20
SCREW-ADJUSTER LOCK_*M32/35*.
SCREW-ADJUSTER LOCK_*M32/35*.
SCREW-ADJUSTER LOCK_*M32/35*.
SCREW-ADJUSTER LOCK_*M32/35*.

Screw-adjuster lock_*m32/35* Taylor #079773

€7,69
SCREW-ADJUSTMENT-5/16-24X1.312 is used for Beater Door Assembly for 8752, 8756, 8757 model.
SCREW-ADJUSTMENT-5/16-24X1.312 is used for Beater Door Assembly for 8752, 8756, 8757 model.
SCREW-ADJUSTMENT-5/16-24X1.312 is used for Beater Door Assembly for 8752, 8756, 8757 model.
SCREW-ADJUSTMENT-5/16-24X1.312 is used for Beater Door Assembly for 8752, 8756, 8757 model.
SCREW-ADJUSTMENT-5/16-24X1.312 is used for Beater Door Assembly for 8752, 8756, 8757 model.
SCREW-ADJUSTMENT-5/16-24X1.312 is used for Beater Door Assembly for 8752, 8756, 8757 model.
SCREW-ADJUSTMENT-5/16-24X1.312 is used for Beater Door Assembly for 8752, 8756, 8757 model.
SCREW-ADJUSTMENT-5/16-24X1.312 is used for Beater Door Assembly for 8752, 8756, 8757 model.

Screw-adjustment-5/16-24x1.312 Taylor #055092

€9,10
SCREW-SHOULDER 10-32X3/16X.078
SCREW-SHOULDER 10-32X3/16X.078
SCREW-SHOULDER 10-32X3/16X.078
SCREW-SHOULDER 10-32X3/16X.078

Screw-shoulder 10-32x3/16x.078 Taylor #079581

€5,99
SCREW-SHOULDER 4-40X 3755 SOC is used to assemble the Motor A.-Mount of the following models: C832/C834/C835/C836/C838.
SCREW-SHOULDER 4-40X 3755 SOC is used to assemble the Motor A.-Mount of the following models: C832/C834/C835/C836/C838.
SCREW-SHOULDER 4-40X 3755 SOC is used to assemble the Motor A.-Mount of the following models: C832/C834/C835/C836/C838.
SCREW-SHOULDER 4-40X 3755 SOC is used to assemble the Motor A.-Mount of the following models: C832/C834/C835/C836/C838.
SCREW-SHOULDER 4-40X 3755 SOC is used to assemble the Motor A.-Mount of the following models: C832/C834/C835/C836/C838.
SCREW-SHOULDER 4-40X 3755 SOC is used to assemble the Motor A.-Mount of the following models: C832/C834/C835/C836/C838.

Screw-shoulder 4-40x 3755 soc Taylor #058381

€84,18
SEAL A. Seals and scrapes the wall of the inlet cavity on the stroke of the plunger, it is used for the following machine models: C602, C606, 774 Topping Pump, 8664, 336.
SEAL A. Seals and scrapes the wall of the inlet cavity on the stroke of the plunger, it is used for the following machine models: C602, C606, 774 Topping Pump, 8664, 336.
SEAL A. Seals and scrapes the wall of the inlet cavity on the stroke of the plunger, it is used for the following machine models: C602, C606, 774 Topping Pump, 8664, 336.
SEAL A. Seals and scrapes the wall of the inlet cavity on the stroke of the plunger, it is used for the following machine models: C602, C606, 774 Topping Pump, 8664, 336.
SEAL A. Seals and scrapes the wall of the inlet cavity on the stroke of the plunger, it is used for the following machine models: C602, C606, 774 Topping Pump, 8664, 336.
SEAL A. Seals and scrapes the wall of the inlet cavity on the stroke of the plunger, it is used for the following machine models: C602, C606, 774 Topping Pump, 8664, 336.

Seal a. aylor #X33057

€4,79
SEAL DRAW VALVE installs into Valve A.-Draw to form Door A.-Freezer (Long Baffle) for the following models: Plastic-3 Spout *Soft Serve* Non Heat Treat 8756/Horizon, Plastic-3 Spout *Soft Serve* Not Heat Treat 8756/Horizon.
SEAL DRAW VALVE installs into Valve A.-Draw to form Door A.-Freezer (Long Baffle) for the following models: Plastic-3 Spout *Soft Serve* Non Heat Treat 8756/Horizon, Plastic-3 Spout *Soft Serve* Not Heat Treat 8756/Horizon.
SEAL DRAW VALVE installs into Valve A.-Draw to form Door A.-Freezer (Long Baffle) for the following models: Plastic-3 Spout *Soft Serve* Non Heat Treat 8756/Horizon, Plastic-3 Spout *Soft Serve* Not Heat Treat 8756/Horizon.
SEAL DRAW VALVE installs into Valve A.-Draw to form Door A.-Freezer (Long Baffle) for the following models: Plastic-3 Spout *Soft Serve* Non Heat Treat 8756/Horizon, Plastic-3 Spout *Soft Serve* Not Heat Treat 8756/Horizon.

Seal draw valve Taylor #034698

€4,50
Seal Drive Shaft is commonly substituted periodically for SHAFT-BEATER.
Seal Drive Shaft is commonly substituted periodically for SHAFT-BEATER.

Seal drive shaft Taylor #031316

€20,92
SENSOR PYROELEC 42 is used to form HOLDER A.-SENSOR for the following models: M-8634 s/n J7060000/up, PH90 J7120000/Up,PH61, 482, 5456, 5472, 8663, (8634 Prior to J7060000). It is also used to form the SENSOR A.-PYROELECTRIC-4 PIN of the models: PH90, 5456, 5461, 8634.
SENSOR PYROELEC 42 is used to form HOLDER A.-SENSOR for the following models: M-8634 s/n J7060000/up, PH90 J7120000/Up,PH61, 482, 5456, 5472, 8663, (8634 Prior to J7060000). It is also used to form the SENSOR A.-PYROELECTRIC-4 PIN of the models: PH90, 5456, 5461, 8634.
SENSOR PYROELEC 42 is used to form HOLDER A.-SENSOR for the following models: M-8634 s/n J7060000/up, PH90 J7120000/Up,PH61, 482, 5456, 5472, 8663, (8634 Prior to J7060000). It is also used to form the SENSOR A.-PYROELECTRIC-4 PIN of the models: PH90, 5456, 5461, 8634.
SENSOR PYROELEC 42 is used to form HOLDER A.-SENSOR for the following models: M-8634 s/n J7060000/up, PH90 J7120000/Up,PH61, 482, 5456, 5472, 8663, (8634 Prior to J7060000). It is also used to form the SENSOR A.-PYROELECTRIC-4 PIN of the models: PH90, 5456, 5461, 8634.
SENSOR PYROELEC 42 is used to form HOLDER A.-SENSOR for the following models: M-8634 s/n J7060000/up, PH90 J7120000/Up,PH61, 482, 5456, 5472, 8663, (8634 Prior to J7060000). It is also used to form the SENSOR A.-PYROELECTRIC-4 PIN of the models: PH90, 5456, 5461, 8634.
SENSOR PYROELEC 42 is used to form HOLDER A.-SENSOR for the following models: M-8634 s/n J7060000/up, PH90 J7120000/Up,PH61, 482, 5456, 5472, 8663, (8634 Prior to J7060000). It is also used to form the SENSOR A.-PYROELECTRIC-4 PIN of the models: PH90, 5456, 5461, 8634.
SENSOR PYROELEC 42 is used to form HOLDER A.-SENSOR for the following models: M-8634 s/n J7060000/up, PH90 J7120000/Up,PH61, 482, 5456, 5472, 8663, (8634 Prior to J7060000). It is also used to form the SENSOR A.-PYROELECTRIC-4 PIN of the models: PH90, 5456, 5461, 8634.
SENSOR PYROELEC 42 is used to form HOLDER A.-SENSOR for the following models: M-8634 s/n J7060000/up, PH90 J7120000/Up,PH61, 482, 5456, 5472, 8663, (8634 Prior to J7060000). It is also used to form the SENSOR A.-PYROELECTRIC-4 PIN of the models: PH90, 5456, 5461, 8634.

Sensor pyroelec 42 Taylor #X38977-SER

€290,89
SHAFT BEATER is used to assemble the Door Assembly of the following models: 702, 741, 772, Beater Door Assembly 104 & 220, 490, 441,444.
SHAFT BEATER is used to assemble the Door Assembly of the following models: 702, 741, 772, Beater Door Assembly 104 & 220, 490, 441,444.
SHAFT BEATER is used to assemble the Door Assembly of the following models: 702, 741, 772, Beater Door Assembly 104 & 220, 490, 441,444.
SHAFT BEATER is used to assemble the Door Assembly of the following models: 702, 741, 772, Beater Door Assembly 104 & 220, 490, 441,444.
SHAFT BEATER is used to assemble the Door Assembly of the following models: 702, 741, 772, Beater Door Assembly 104 & 220, 490, 441,444.
SHAFT BEATER is used to assemble the Door Assembly of the following models: 702, 741, 772, Beater Door Assembly 104 & 220, 490, 441,444.
SHAFT BEATER is used to assemble the Door Assembly of the following models: 702, 741, 772, Beater Door Assembly 104 & 220, 490, 441,444.
SHAFT BEATER is used to assemble the Door Assembly of the following models: 702, 741, 772, Beater Door Assembly 104 & 220, 490, 441,444.

Shaft beater Taylor #033498

€338,99
Shake Peristaltic Pump
Shake Peristaltic Pump

Shake Peristaltic Pump

€115,14
SHIELD-GREASE*M22* is used for the following machines: C832, C834, C835, C836, C838, C842, C844, C845, 810, 812, 820, 822, 828 Series.
SHIELD-GREASE*M22* is used for the following machines: C832, C834, C835, C836, C838, C842, C844, C845, 810, 812, 820, 822, 828 Series.
SHIELD-GREASE*M22* is used for the following machines: C832, C834, C835, C836, C838, C842, C844, C845, 810, 812, 820, 822, 828 Series.
SHIELD-GREASE*M22* is used for the following machines: C832, C834, C835, C836, C838, C842, C844, C845, 810, 812, 820, 822, 828 Series.

Shield-grease*m22* Taylor #078285

€16,49
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m
Slat Top Plastic Chain LF 880-K250 Brown x3.048m

Slat Top Plastic Chain LF 880-K250 Brown x3.048m

€130,00
Socket-QD is a quick-connect 90° angle fitting for Plug−Q.D. CO2 1/8MP.
Socket-QD is a quick-connect 90° angle fitting for Plug−Q.D. CO2 1/8MP.
Socket-QD is a quick-connect 90° angle fitting for Plug−Q.D. CO2 1/8MP.
Socket-QD is a quick-connect 90° angle fitting for Plug−Q.D. CO2 1/8MP.

Socket-q.d. co2 90deg 1/4barb Taylor #021524

€33,47
SOCKET-Q.D. LIQ-90DEG-1/4BARB is used to form TANK-SYRUP of the following models: 60, H60, PH61, 62, PH90, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664. It is also used to form LINE A.-SYRUP for model pots including 60, H60, 62, 452, 453, 480 Prior to S/N H0083033.
SOCKET-Q.D. LIQ-90DEG-1/4BARB is used to form TANK-SYRUP of the following models: 60, H60, PH61, 62, PH90, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664. It is also used to form LINE A.-SYRUP for model pots including 60, H60, 62, 452, 453, 480 Prior to S/N H0083033.
SOCKET-Q.D. LIQ-90DEG-1/4BARB is used to form TANK-SYRUP of the following models: 60, H60, PH61, 62, PH90, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664. It is also used to form LINE A.-SYRUP for model pots including 60, H60, 62, 452, 453, 480 Prior to S/N H0083033.
SOCKET-Q.D. LIQ-90DEG-1/4BARB is used to form TANK-SYRUP of the following models: 60, H60, PH61, 62, PH90, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664. It is also used to form LINE A.-SYRUP for model pots including 60, H60, 62, 452, 453, 480 Prior to S/N H0083033.
SOCKET-Q.D. LIQ-90DEG-1/4BARB is used to form TANK-SYRUP of the following models: 60, H60, PH61, 62, PH90, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664. It is also used to form LINE A.-SYRUP for model pots including 60, H60, 62, 452, 453, 480 Prior to S/N H0083033.
SOCKET-Q.D. LIQ-90DEG-1/4BARB is used to form TANK-SYRUP of the following models: 60, H60, PH61, 62, PH90, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664. It is also used to form LINE A.-SYRUP for model pots including 60, H60, 62, 452, 453, 480 Prior to S/N H0083033.
SOCKET-Q.D. LIQ-90DEG-1/4BARB is used to form TANK-SYRUP of the following models: 60, H60, PH61, 62, PH90, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664. It is also used to form LINE A.-SYRUP for model pots including 60, H60, 62, 452, 453, 480 Prior to S/N H0083033.
SOCKET-Q.D. LIQ-90DEG-1/4BARB is used to form TANK-SYRUP of the following models: 60, H60, PH61, 62, PH90, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664. It is also used to form LINE A.-SYRUP for model pots including 60, H60, 62, 452, 453, 480 Prior to S/N H0083033.

Socket-q.d. liq-90deg-1/4barb Taylor #021026

€47,29
Soft Serve Port O-Ring
Soft Serve Port O-Ring

Soft Serve Port O-Ring

€0,32
1234567891011121314