Section
Drop element here

All The Products

Spigot Switch
Spigot Switch

Spigot Switch

€15,00
SPINNER joins Blade A.-Spinner and Seal-Spinner Shaft to form Door A.-Freezer for the following models: Plastic-1 Spout-4 Flavor *Shake* Heat Treat 5472, PH61, PH90/Shake, 8634/Shake, PLASTIC -1 SPOUT, PLASTIC -1 SPOUT, Plastic-1 Spout-4 Flavor *Shake* Non Heat Treat 482, 5456, 5461, 8663/Shake .
SPINNER joins Blade A.-Spinner and Seal-Spinner Shaft to form Door A.-Freezer for the following models: Plastic-1 Spout-4 Flavor *Shake* Heat Treat 5472, PH61, PH90/Shake, 8634/Shake, PLASTIC -1 SPOUT, PLASTIC -1 SPOUT, Plastic-1 Spout-4 Flavor *Shake* Non Heat Treat 482, 5456, 5461, 8663/Shake .
SPINNER joins Blade A.-Spinner and Seal-Spinner Shaft to form Door A.-Freezer for the following models: Plastic-1 Spout-4 Flavor *Shake* Heat Treat 5472, PH61, PH90/Shake, 8634/Shake, PLASTIC -1 SPOUT, PLASTIC -1 SPOUT, Plastic-1 Spout-4 Flavor *Shake* Non Heat Treat 482, 5456, 5461, 8663/Shake .
SPINNER joins Blade A.-Spinner and Seal-Spinner Shaft to form Door A.-Freezer for the following models: Plastic-1 Spout-4 Flavor *Shake* Heat Treat 5472, PH61, PH90/Shake, 8634/Shake, PLASTIC -1 SPOUT, PLASTIC -1 SPOUT, Plastic-1 Spout-4 Flavor *Shake* Non Heat Treat 482, 5456, 5461, 8663/Shake .
SPINNER joins Blade A.-Spinner and Seal-Spinner Shaft to form Door A.-Freezer for the following models: Plastic-1 Spout-4 Flavor *Shake* Heat Treat 5472, PH61, PH90/Shake, 8634/Shake, PLASTIC -1 SPOUT, PLASTIC -1 SPOUT, Plastic-1 Spout-4 Flavor *Shake* Non Heat Treat 482, 5456, 5461, 8663/Shake .
SPINNER joins Blade A.-Spinner and Seal-Spinner Shaft to form Door A.-Freezer for the following models: Plastic-1 Spout-4 Flavor *Shake* Heat Treat 5472, PH61, PH90/Shake, 8634/Shake, PLASTIC -1 SPOUT, PLASTIC -1 SPOUT, Plastic-1 Spout-4 Flavor *Shake* Non Heat Treat 482, 5456, 5461, 8663/Shake .

Spinner *8663* Taylor #034054

€9,26
Spout Adapter With O-Rings-St
Spout Adapter With O-Rings-St

Spout Adapter With O-Rings-St

€12,00
SPRING PLUNGER SYRUP PUMP is used to form the PUMP-SYRUP of the following models: 774, 8757, 430/Mr. Submarine, 8662, 8663, 8664, 8781, 8756S 8663/France w/Red Knob, PH85, PH90, 8634, 8657, 8784.
SPRING PLUNGER SYRUP PUMP is used to form the PUMP-SYRUP of the following models: 774, 8757, 430/Mr. Submarine, 8662, 8663, 8664, 8781, 8756S 8663/France w/Red Knob, PH85, PH90, 8634, 8657, 8784.
SPRING PLUNGER SYRUP PUMP is used to form the PUMP-SYRUP of the following models: 774, 8757, 430/Mr. Submarine, 8662, 8663, 8664, 8781, 8756S 8663/France w/Red Knob, PH85, PH90, 8634, 8657, 8784.
SPRING PLUNGER SYRUP PUMP is used to form the PUMP-SYRUP of the following models: 774, 8757, 430/Mr. Submarine, 8662, 8663, 8664, 8781, 8756S 8663/France w/Red Knob, PH85, PH90, 8634, 8657, 8784.

Spring plunger syrup pump Taylor #032761

€2,89
SPRING RETURN LEFT is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.-Draw *Twin Twist* DQ,Switch A.- Draw*632* Left (Shake).
SPRING RETURN LEFT is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.-Draw *Twin Twist* DQ,Switch A.- Draw*632* Left (Shake).
SPRING RETURN LEFT is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.-Draw *Twin Twist* DQ,Switch A.- Draw*632* Left (Shake).
SPRING RETURN LEFT is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.-Draw *Twin Twist* DQ,Switch A.- Draw*632* Left (Shake).
SPRING RETURN LEFT is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.-Draw *Twin Twist* DQ,Switch A.- Draw*632* Left (Shake).
SPRING RETURN LEFT is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.-Draw *Twin Twist* DQ,Switch A.- Draw*632* Left (Shake).
SPRING RETURN LEFT is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.-Draw *Twin Twist* DQ,Switch A.- Draw*632* Left (Shake).
SPRING RETURN LEFT is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.-Draw *Twin Twist* DQ,Switch A.- Draw*632* Left (Shake).

Spring return left Taylor #023487

€5,49
SPRING RETURN LEFT is used for the model: Switch A.-Draw *321-750*Self Closing.
SPRING RETURN LEFT is used for the model: Switch A.-Draw *321-750*Self Closing.
SPRING RETURN LEFT is used for the model: Switch A.-Draw *321-750*Self Closing.
SPRING RETURN LEFT is used for the model: Switch A.-Draw *321-750*Self Closing.
SPRING RETURN LEFT is used for the model: Switch A.-Draw *321-750*Self Closing.
SPRING RETURN LEFT is used for the model: Switch A.-Draw *321-750*Self Closing.
SPRING RETURN LEFT is used for the model: Switch A.-Draw *321-750*Self Closing.
SPRING RETURN LEFT is used for the model: Switch A.-Draw *321-750*Self Closing.

Spring return left Taylor #041660

€3,89
SPRING RETURN RIGHT is used to form SWITCH A.-DRAW of the following models: Switch A.-Draw *750-1-2, Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.- Draw *390*EVC.
SPRING RETURN RIGHT is used to form SWITCH A.-DRAW of the following models: Switch A.-Draw *750-1-2, Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.- Draw *390*EVC.
SPRING RETURN RIGHT is used to form SWITCH A.-DRAW of the following models: Switch A.-Draw *750-1-2, Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.- Draw *390*EVC.
SPRING RETURN RIGHT is used to form SWITCH A.-DRAW of the following models: Switch A.-Draw *750-1-2, Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.- Draw *390*EVC.
SPRING RETURN RIGHT is used to form SWITCH A.-DRAW of the following models: Switch A.-Draw *750-1-2, Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.- Draw *390*EVC.
SPRING RETURN RIGHT is used to form SWITCH A.-DRAW of the following models: Switch A.-Draw *750-1-2, Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.- Draw *390*EVC.
SPRING RETURN RIGHT is used to form SWITCH A.-DRAW of the following models: Switch A.-Draw *750-1-2, Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.- Draw *390*EVC.
SPRING RETURN RIGHT is used to form SWITCH A.-DRAW of the following models: Switch A.-Draw *750-1-2, Switch A.-Draw *Twin Twist, Switch A.-Draw *336*, Switch A.- Draw *390*EVC.

Spring return right Taylor #023488

€2,19
SPRING-3/8ODX3/16IDX1L-GOLD is used to form COUPLING-TORQUE for the following models: PH61, PH90, 5472, 8634 (UPDATE 132).
SPRING-3/8ODX3/16IDX1L-GOLD is used to form COUPLING-TORQUE for the following models: PH61, PH90, 5472, 8634 (UPDATE 132).
SPRING-3/8ODX3/16IDX1L-GOLD is used to form COUPLING-TORQUE for the following models: PH61, PH90, 5472, 8634 (UPDATE 132).
SPRING-3/8ODX3/16IDX1L-GOLD is used to form COUPLING-TORQUE for the following models: PH61, PH90, 5472, 8634 (UPDATE 132).
SPRING-3/8ODX3/16IDX1L-GOLD is used to form COUPLING-TORQUE for the following models: PH61, PH90, 5472, 8634 (UPDATE 132).
SPRING-3/8ODX3/16IDX1L-GOLD is used to form COUPLING-TORQUE for the following models: PH61, PH90, 5472, 8634 (UPDATE 132).

Spring-3/8odx3/16idx1l-gold Taylor #052476

€3,99
SPRING-CONSTANT FORCE .375W is used to form Dispenser A.-Cone-Drawer-Sgl for the following models: Single Drawer-8662-8756S, Dispenser A.-Cone Double Drawer - 8664.
SPRING-CONSTANT FORCE .375W is used to form Dispenser A.-Cone-Drawer-Sgl for the following models: Single Drawer-8662-8756S, Dispenser A.-Cone Double Drawer - 8664.
SPRING-CONSTANT FORCE .375W is used to form Dispenser A.-Cone-Drawer-Sgl for the following models: Single Drawer-8662-8756S, Dispenser A.-Cone Double Drawer - 8664.
SPRING-CONSTANT FORCE .375W is used to form Dispenser A.-Cone-Drawer-Sgl for the following models: Single Drawer-8662-8756S, Dispenser A.-Cone Double Drawer - 8664.
SPRING-CONSTANT FORCE .375W is used to form Dispenser A.-Cone-Drawer-Sgl for the following models: Single Drawer-8662-8756S, Dispenser A.-Cone Double Drawer - 8664.
SPRING-CONSTANT FORCE .375W is used to form Dispenser A.-Cone-Drawer-Sgl for the following models: Single Drawer-8662-8756S, Dispenser A.-Cone Double Drawer - 8664.
SPRING-CONSTANT FORCE .375W is used to form Dispenser A.-Cone-Drawer-Sgl for the following models: Single Drawer-8662-8756S, Dispenser A.-Cone Double Drawer - 8664.
SPRING-CONSTANT FORCE .375W is used to form Dispenser A.-Cone-Drawer-Sgl for the following models: Single Drawer-8662-8756S, Dispenser A.-Cone Double Drawer - 8664.

Spring-constant force .375w Taylor #028735

€2,50
SPRING-EXTENSION 1.4X.12X8.8 is used to form Springs of models: C832/C834/C835/C836/C838.
SPRING-EXTENSION 1.4X.12X8.8 is used to form Springs of models: C832/C834/C835/C836/C838.
SPRING-EXTENSION 1.4X.12X8.8 is used to form Springs of models: C832/C834/C835/C836/C838.
SPRING-EXTENSION 1.4X.12X8.8 is used to form Springs of models: C832/C834/C835/C836/C838.
SPRING-EXTENSION 1.4X.12X8.8 is used to form Springs of models: C832/C834/C835/C836/C838.
SPRING-EXTENSION 1.4X.12X8.8 is used to form Springs of models: C832/C834/C835/C836/C838.

Spring-extension 1.4x.12x8.8 Taylor #074396

€91,67
SPRING-EXTENSION LATCH is used in the following machine models: McDonald's Intelligap Grills C842/C844/C845, C810, C812, C820, C822.
SPRING-EXTENSION LATCH is used in the following machine models: McDonald's Intelligap Grills C842/C844/C845, C810, C812, C820, C822.
SPRING-EXTENSION LATCH is used in the following machine models: McDonald's Intelligap Grills C842/C844/C845, C810, C812, C820, C822.
SPRING-EXTENSION LATCH is used in the following machine models: McDonald's Intelligap Grills C842/C844/C845, C810, C812, C820, C822.
SPRING-EXTENSION LATCH is used in the following machine models: McDonald's Intelligap Grills C842/C844/C845, C810, C812, C820, C822.
SPRING-EXTENSION LATCH is used in the following machine models: McDonald's Intelligap Grills C842/C844/C845, C810, C812, C820, C822.
SPRING-EXTENSION LATCH is used in the following machine models: McDonald's Intelligap Grills C842/C844/C845, C810, C812, C820, C822.
SPRING-EXTENSION LATCH is used in the following machine models: McDonald's Intelligap Grills C842/C844/C845, C810, C812, C820, C822.

Spring-extension latch *c842* Taylor #072617

€6,98
SPRING-EXTENSION.467X.062X1.81 is used to dial Actuator A.-Draw Switch for the following models: C712 & C713.
SPRING-EXTENSION.467X.062X1.81 is used to dial Actuator A.-Draw Switch for the following models: C712 & C713.
SPRING-EXTENSION.467X.062X1.81 is used to dial Actuator A.-Draw Switch for the following models: C712 & C713.
SPRING-EXTENSION.467X.062X1.81 is used to dial Actuator A.-Draw Switch for the following models: C712 & C713.
SPRING-EXTENSION.467X.062X1.81 is used to dial Actuator A.-Draw Switch for the following models: C712 & C713.
SPRING-EXTENSION.467X.062X1.81 is used to dial Actuator A.-Draw Switch for the following models: C712 & C713.
SPRING-EXTENSION.467X.062X1.81 is used to dial Actuator A.-Draw Switch for the following models: C712 & C713.
SPRING-EXTENSION.467X.062X1.81 is used to dial Actuator A.-Draw Switch for the following models: C712 & C713.

Spring-extension.467x.062x1.81 Taylor #069392

€18,53
SPRING-RETURN-RIGHT-TWIN TWIST is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Self Closing*, Switch A.-Draw *336*Self Close.
SPRING-RETURN-RIGHT-TWIN TWIST is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Self Closing*, Switch A.-Draw *336*Self Close.
SPRING-RETURN-RIGHT-TWIN TWIST is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Self Closing*, Switch A.-Draw *336*Self Close.
SPRING-RETURN-RIGHT-TWIN TWIST is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Self Closing*, Switch A.-Draw *336*Self Close.
SPRING-RETURN-RIGHT-TWIN TWIST is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Self Closing*, Switch A.-Draw *336*Self Close.
SPRING-RETURN-RIGHT-TWIN TWIST is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Self Closing*, Switch A.-Draw *336*Self Close.
SPRING-RETURN-RIGHT-TWIN TWIST is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Self Closing*, Switch A.-Draw *336*Self Close.
SPRING-RETURN-RIGHT-TWIN TWIST is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Self Closing*, Switch A.-Draw *336*Self Close.
SPRING-RETURN-RIGHT-TWIN TWIST is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Self Closing*, Switch A.-Draw *336*Self Close.
SPRING-RETURN-RIGHT-TWIN TWIST is used to form SWITCH A.-DRAW for the following models: Switch A.-Draw *Self Closing*, Switch A.-Draw *336*Self Close.

Spring-return-right-twin twist Taylor #038924

€1,79
SPRING-TORQ.165LB/INCH *BLUE* is used to form Switch A.- Torque for the following models: 340, 341, 342.
SPRING-TORQ.165LB/INCH *BLUE* is used to form Switch A.- Torque for the following models: 340, 341, 342.
SPRING-TORQ.165LB/INCH *BLUE* is used to form Switch A.- Torque for the following models: 340, 341, 342.
SPRING-TORQ.165LB/INCH *BLUE* is used to form Switch A.- Torque for the following models: 340, 341, 342.
SPRING-TORQ.165LB/INCH *BLUE* is used to form Switch A.- Torque for the following models: 340, 341, 342.
SPRING-TORQ.165LB/INCH *BLUE* is used to form Switch A.- Torque for the following models: 340, 341, 342.
SPRING-TORQ.165LB/INCH *BLUE* is used to form Switch A.- Torque for the following models: 340, 341, 342.
SPRING-TORQ.165LB/INCH *BLUE* is used to form Switch A.- Torque for the following models: 340, 341, 342.

Spring-torq.165lb/inch *blue* Taylor #029259

€4,69
SPRING-TORQ.217LB/INCH*PURPLE* #050455 has dimensions of 30x10x30mm and a weight of 2g. Its pulling force is 217 pounds per inch, ensuring exceptional strength. The chosen color is purple, which gives the product an elegant look. It can be used in the production of industrial machinery such as compressors, motors, pumps or turbines. Furthermore, this spring is particularly suitable for the production of electronic devices such as switches, relays and sensors.
SPRING-TORQ.217LB/INCH*PURPLE* #050455 has dimensions of 30x10x30mm and a weight of 2g. Its pulling force is 217 pounds per inch, ensuring exceptional strength. The chosen color is purple, which gives the product an elegant look. It can be used in the production of industrial machinery such as compressors, motors, pumps or turbines. Furthermore, this spring is particularly suitable for the production of electronic devices such as switches, relays and sensors.
SPRING-TORQ.217LB/INCH*PURPLE* #050455 has dimensions of 30x10x30mm and a weight of 2g. Its pulling force is 217 pounds per inch, ensuring exceptional strength. The chosen color is purple, which gives the product an elegant look. It can be used in the production of industrial machinery such as compressors, motors, pumps or turbines. Furthermore, this spring is particularly suitable for the production of electronic devices such as switches, relays and sensors.
SPRING-TORQ.217LB/INCH*PURPLE* #050455 has dimensions of 30x10x30mm and a weight of 2g. Its pulling force is 217 pounds per inch, ensuring exceptional strength. The chosen color is purple, which gives the product an elegant look. It can be used in the production of industrial machinery such as compressors, motors, pumps or turbines. Furthermore, this spring is particularly suitable for the production of electronic devices such as switches, relays and sensors.
SPRING-TORQ.217LB/INCH*PURPLE* #050455 has dimensions of 30x10x30mm and a weight of 2g. Its pulling force is 217 pounds per inch, ensuring exceptional strength. The chosen color is purple, which gives the product an elegant look. It can be used in the production of industrial machinery such as compressors, motors, pumps or turbines. Furthermore, this spring is particularly suitable for the production of electronic devices such as switches, relays and sensors.
SPRING-TORQ.217LB/INCH*PURPLE* #050455 has dimensions of 30x10x30mm and a weight of 2g. Its pulling force is 217 pounds per inch, ensuring exceptional strength. The chosen color is purple, which gives the product an elegant look. It can be used in the production of industrial machinery such as compressors, motors, pumps or turbines. Furthermore, this spring is particularly suitable for the production of electronic devices such as switches, relays and sensors.

Spring-torq.217lb/inch*purple* Taylor #050455

€16,45
SPRING-TORQ.33LB/INCH *RED* is used for Beater Door Assembly of the following models: 340, 341, 342.
SPRING-TORQ.33LB/INCH *RED* is used for Beater Door Assembly of the following models: 340, 341, 342.
SPRING-TORQ.33LB/INCH *RED* is used for Beater Door Assembly of the following models: 340, 341, 342.
SPRING-TORQ.33LB/INCH *RED* is used for Beater Door Assembly of the following models: 340, 341, 342.
SPRING-TORQ.33LB/INCH *RED* is used for Beater Door Assembly of the following models: 340, 341, 342.
SPRING-TORQ.33LB/INCH *RED* is used for Beater Door Assembly of the following models: 340, 341, 342.
SPRING-TORQ.33LB/INCH *RED* is used for Beater Door Assembly of the following models: 340, 341, 342.
SPRING-TORQ.33LB/INCH *RED* is used for Beater Door Assembly of the following models: 340, 341, 342.

Spring-torq.33lb/inch *red* Taylor #020232

€4,79
SPRING-TORQUE *WHITE.
SPRING-TORQUE *WHITE.

Spring-torque *white* Taylor #050901

€2,00
ST23240V390W
ST23240V390W

ST23240V390W

€50,00
STANDOFF-NYLON 6-32X1/2L SNAP for model: C713.
STANDOFF-NYLON 6-32X1/2L SNAP for model: C713.
STANDOFF-NYLON 6-32X1/2L SNAP for model: C713.
STANDOFF-NYLON 6-32X1/2L SNAP for model: C713.
STANDOFF-NYLON 6-32X1/2L SNAP for model: C713.
STANDOFF-NYLON 6-32X1/2L SNAP for model: C713.

Standoff-nylon 6-32x1/2l snap Taylor #040280-002

€7,45
STARTER-3PH 2.2 TO 4AMP SOFT is used for Taylor machines of the following models: C712 and C713.
STARTER-3PH 2.2 TO 4AMP SOFT is used for Taylor machines of the following models: C712 and C713.
STARTER-3PH 2.2 TO 4AMP SOFT is used for Taylor machines of the following models: C712 and C713.
STARTER-3PH 2.2 TO 4AMP SOFT is used for Taylor machines of the following models: C712 and C713.

Starter-3ph 2.2 to 4amp soft Taylor #066794-33H

€110,00
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.
STUD-NOSE CONE is used to form the Door and Beater Assembly of the c706, c707 models.

Stud-nose cone Taylor #055987

€28,06
SU-AN371
SU-AN371

SU-AN371

€70,00
Switch-Lever-SPDT-15A-125-480V must be inserted in the Bracket-Switch Door, it is compatible with the following models: Switch A.-Draw *121-6 131-32*, Switch A.-Draw *452- 453*, Switch A.-Draw *8781*, witch A.-Draw *445, Switch A.-Draw *Gen Usage*, Spinner A.-Door-Door Mount, Switch A.-Draw*060*, Switch A .-Draw *771*L & R*, witch A.-Draw *632.
Switch-Lever-SPDT-15A-125-480V must be inserted in the Bracket-Switch Door, it is compatible with the following models: Switch A.-Draw *121-6 131-32*, Switch A.-Draw *452- 453*, Switch A.-Draw *8781*, witch A.-Draw *445, Switch A.-Draw *Gen Usage*, Spinner A.-Door-Door Mount, Switch A.-Draw*060*, Switch A .-Draw *771*L & R*, witch A.-Draw *632.
Switch-Lever-SPDT-15A-125-480V must be inserted in the Bracket-Switch Door, it is compatible with the following models: Switch A.-Draw *121-6 131-32*, Switch A.-Draw *452- 453*, Switch A.-Draw *8781*, witch A.-Draw *445, Switch A.-Draw *Gen Usage*, Spinner A.-Door-Door Mount, Switch A.-Draw*060*, Switch A .-Draw *771*L & R*, witch A.-Draw *632.
Switch-Lever-SPDT-15A-125-480V must be inserted in the Bracket-Switch Door, it is compatible with the following models: Switch A.-Draw *121-6 131-32*, Switch A.-Draw *452- 453*, Switch A.-Draw *8781*, witch A.-Draw *445, Switch A.-Draw *Gen Usage*, Spinner A.-Door-Door Mount, Switch A.-Draw*060*, Switch A .-Draw *771*L & R*, witch A.-Draw *632.

Switch lever spdt 125v-480v Taylor #09367

€36,42
SWITCH LEVER SPDT 1A 250VAC.
SWITCH LEVER SPDT 1A 250VAC.
SWITCH LEVER SPDT 1A 250VAC.
SWITCH LEVER SPDT 1A 250VAC.

Switch lever spdt 1a 250vac Taylor #074821

€6,84
SWITCH-ROCKER-SPDT TAYLOR 014090.
SWITCH-ROCKER-SPDT TAYLOR 014090.
SWITCH-ROCKER-SPDT TAYLOR 014090.
SWITCH-ROCKER-SPDT TAYLOR 014090.
SWITCH-ROCKER-SPDT TAYLOR 014090.
SWITCH-ROCKER-SPDT TAYLOR 014090.
SWITCH-ROCKER-SPDT TAYLOR 014090.
SWITCH-ROCKER-SPDT TAYLOR 014090.

Switch rocker spdt Taylor #014090

€50,00
SWITCH-MEMBRANE-5 POS-8 INCH L.
SWITCH-MEMBRANE-5 POS-8 INCH L.
SWITCH-MEMBRANE-5 POS-8 INCH L.
SWITCH-MEMBRANE-5 POS-8 INCH L.
SWITCH-MEMBRANE-5 POS-8 INCH L.
SWITCH-MEMBRANE-5 POS-8 INCH L.

Switch-membrane-5 pos-8 inch l Taylor #044520

€25,79
SWITCH-PRESSURE 440 PSI-SOLDER TAYLOR 046362.
SWITCH-PRESSURE 440 PSI-SOLDER TAYLOR 046362.
SWITCH-PRESSURE 440 PSI-SOLDER TAYLOR 046362.
SWITCH-PRESSURE 440 PSI-SOLDER TAYLOR 046362.
SWITCH-PRESSURE 440 PSI-SOLDER TAYLOR 046362.
SWITCH-PRESSURE 440 PSI-SOLDER TAYLOR 046362.
SWITCH-PRESSURE 440 PSI-SOLDER TAYLOR 046362.
SWITCH-PRESSURE 440 PSI-SOLDER TAYLOR 046362.
SWITCH-PRESSURE 440 PSI-SOLDER TAYLOR 046362.
SWITCH-PRESSURE 440 PSI-SOLDER TAYLOR 046362.

Switch-pressure 440 psi-solder Taylor #046362

€32,89
This three pole double throw (3PDT) switch is designed to provide on/off/on functions, making it perfect for applications that require multiple switching options. With its compact size of 60x30x60mm and lightweight 50g construction.
This three pole double throw (3PDT) switch is designed to provide on/off/on functions, making it perfect for applications that require multiple switching options. With its compact size of 60x30x60mm and lightweight 50g construction.
This three pole double throw (3PDT) switch is designed to provide on/off/on functions, making it perfect for applications that require multiple switching options. With its compact size of 60x30x60mm and lightweight 50g construction.
This three pole double throw (3PDT) switch is designed to provide on/off/on functions, making it perfect for applications that require multiple switching options. With its compact size of 60x30x60mm and lightweight 50g construction.
This three pole double throw (3PDT) switch is designed to provide on/off/on functions, making it perfect for applications that require multiple switching options. With its compact size of 60x30x60mm and lightweight 50g construction.
This three pole double throw (3PDT) switch is designed to provide on/off/on functions, making it perfect for applications that require multiple switching options. With its compact size of 60x30x60mm and lightweight 50g construction.
This three pole double throw (3PDT) switch is designed to provide on/off/on functions, making it perfect for applications that require multiple switching options. With its compact size of 60x30x60mm and lightweight 50g construction.
This three pole double throw (3PDT) switch is designed to provide on/off/on functions, making it perfect for applications that require multiple switching options. With its compact size of 60x30x60mm and lightweight 50g construction.

Switch-toggle-3pdt*on-off-on Taylor #017184

€1,39
1234567891011121314