Section
Drop element here

All The Products

HANDLE A.-DRAW-WELD is used for the following machines: C706, C707, C708, C709.
HANDLE A.-DRAW-WELD is used for the following machines: C706, C707, C708, C709.
HANDLE A.-DRAW-WELD is used for the following machines: C706, C707, C708, C709.
HANDLE A.-DRAW-WELD is used for the following machines: C706, C707, C708, C709.

Handle a.-draw-weld Taylor #X56246

€89,98
HANDLE VALVE must be inserted inside Door A.-Freezer for the following models: Plastic-3 Spout *Soft Serve* 162, 168.
HANDLE VALVE must be inserted inside Door A.-Freezer for the following models: Plastic-3 Spout *Soft Serve* 162, 168.
HANDLE VALVE must be inserted inside Door A.-Freezer for the following models: Plastic-3 Spout *Soft Serve* 162, 168.
HANDLE VALVE must be inserted inside Door A.-Freezer for the following models: Plastic-3 Spout *Soft Serve* 162, 168.

Handle-draw valve Taylor #030564

€18,21
HARNESS A-COMP.VALVE is used for the following models: C832, C842, L810
HARNESS A-COMP.VALVE is used for the following models: C832, C842, L810
HARNESS A-COMP.VALVE is used for the following models: C832, C842, L810
HARNESS A-COMP.VALVE is used for the following models: C832, C842, L810

Harness a-comp.valve *c842* Taylor #X72743

€27,89
HARNESS A-COMP/TB is a connector for ControlA.-Upper for the C842
HARNESS A-COMP/TB is a connector for ControlA.-Upper for the C842
HARNESS A-COMP/TB is a connector for ControlA.-Upper for the C842
HARNESS A-COMP/TB is a connector for ControlA.-Upper for the C842

Harness a-comp/tb *c842* Taylor #X72854

€27,89
Harness-c602 pyro to shk pers Taylor #059135
Harness-c602 pyro to shk pers Taylor #059135

Harness-c602 pyro to shk pers Taylor #059135

€12,00
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.
HARNESS-PCB/GR SWITCH is used to form Control A.-Lower for the following models: C832, C810, L810.

Harness-pcb/gr switch *c832* Taylor #072529

€13,98
HARNESS-SSR TO I/O is used to form Control A.-Upper for the following models: C842, C810, L810, C812, L812, (820, 822, 828 Series).
HARNESS-SSR TO I/O is used to form Control A.-Upper for the following models: C842, C810, L810, C812, L812, (820, 822, 828 Series).
HARNESS-SSR TO I/O is used to form Control A.-Upper for the following models: C842, C810, L810, C812, L812, (820, 822, 828 Series).
HARNESS-SSR TO I/O is used to form Control A.-Upper for the following models: C842, C810, L810, C812, L812, (820, 822, 828 Series).

Harness-ssr to i/o *c842* Taylor #072626

€27,95
Right door hinge, model 8634 taylor.
Right door hinge, model 8634 taylor.
Right door hinge, model 8634 taylor.
Right door hinge, model 8634 taylor.

Hinge a.-door*8634* right Taylor #X45736

€6,52
HOLDER CUP SHK.
HOLDER CUP SHK.
HOLDER CUP SHK.
HOLDER CUP SHK.
HOLDER CUP SHK.
HOLDER CUP SHK.

Holder cup shk Taylor #038985-1

€47,09
HOLDER-FUSE-15A, 250V is used for models: C810, L810, C812, L812, C822, L822, C832 - 60Hz, C832 - 50Hz, C835 - 60Hz, C835 - 50Hz, C836 & C838, C842 - 60Hz, C842/C844 - 50Hz.
HOLDER-FUSE-15A, 250V is used for models: C810, L810, C812, L812, C822, L822, C832 - 60Hz, C832 - 50Hz, C835 - 60Hz, C835 - 50Hz, C836 & C838, C842 - 60Hz, C842/C844 - 50Hz.
HOLDER-FUSE-15A, 250V is used for models: C810, L810, C812, L812, C822, L822, C832 - 60Hz, C832 - 50Hz, C835 - 60Hz, C835 - 50Hz, C836 & C838, C842 - 60Hz, C842/C844 - 50Hz.
HOLDER-FUSE-15A, 250V is used for models: C810, L810, C812, L812, C822, L822, C832 - 60Hz, C832 - 50Hz, C835 - 60Hz, C835 - 50Hz, C836 & C838, C842 - 60Hz, C842/C844 - 50Hz.
HOLDER-FUSE-15A, 250V is used for models: C810, L810, C812, L812, C822, L822, C832 - 60Hz, C832 - 50Hz, C835 - 60Hz, C835 - 50Hz, C836 & C838, C842 - 60Hz, C842/C844 - 50Hz.
HOLDER-FUSE-15A, 250V is used for models: C810, L810, C812, L812, C822, L822, C832 - 60Hz, C832 - 50Hz, C835 - 60Hz, C835 - 50Hz, C836 & C838, C842 - 60Hz, C842/C844 - 50Hz.

Holder-fuse-15a, 250v Taylor #076299

€9,35
Our product HOLDER-FUSE-IN LINE- TYPE HLR #045606, is a holder for fuses with dimensions 100x25x55mm and weight of 13g. This fuse holder fits easily into most electrical circuits, ensuring the safety of connected appliances.
Our product HOLDER-FUSE-IN LINE- TYPE HLR #045606, is a holder for fuses with dimensions 100x25x55mm and weight of 13g. This fuse holder fits easily into most electrical circuits, ensuring the safety of connected appliances.
Our product HOLDER-FUSE-IN LINE- TYPE HLR #045606, is a holder for fuses with dimensions 100x25x55mm and weight of 13g. This fuse holder fits easily into most electrical circuits, ensuring the safety of connected appliances.
Our product HOLDER-FUSE-IN LINE- TYPE HLR #045606, is a holder for fuses with dimensions 100x25x55mm and weight of 13g. This fuse holder fits easily into most electrical circuits, ensuring the safety of connected appliances.
Our product HOLDER-FUSE-IN LINE- TYPE HLR #045606, is a holder for fuses with dimensions 100x25x55mm and weight of 13g. This fuse holder fits easily into most electrical circuits, ensuring the safety of connected appliances.
Our product HOLDER-FUSE-IN LINE- TYPE HLR #045606, is a holder for fuses with dimensions 100x25x55mm and weight of 13g. This fuse holder fits easily into most electrical circuits, ensuring the safety of connected appliances.

Holder-fuse-in line- type hlr Taylor #045606

€3,64
INDICATOR-DIGITAL TEMP-SOLAR is used for the following models: 8756S-J7052067/UP, 8757-J9050000/UP.
INDICATOR-DIGITAL TEMP-SOLAR is used for the following models: 8756S-J7052067/UP, 8757-J9050000/UP.
INDICATOR-DIGITAL TEMP-SOLAR is used for the following models: 8756S-J7052067/UP, 8757-J9050000/UP.
INDICATOR-DIGITAL TEMP-SOLAR is used for the following models: 8756S-J7052067/UP, 8757-J9050000/UP.

Indicator-digital temp-solar Taylor #051234

€26,03
Injector Head O-Ring 2-020
Injector Head O-Ring 2-020

Injector Head O-Ring 2-020

€0,17
Injector Motor Assembly Fb80
Injector Motor Assembly Fb80

Injector Motor Assembly Fb80

€130,60
Injector Motor Assembly Ts80
Injector Motor Assembly Ts80

Injector Motor Assembly Ts80

€152,00
Injector Suspension Bracket
Injector Suspension Bracket

Injector Suspension Bracket

€0,00
INSERT is used to form TANK-SYRUP for the following models: 452, 482, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664, 60, H60, PH61, 62, PH90.
INSERT is used to form TANK-SYRUP for the following models: 452, 482, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664, 60, H60, PH61, 62, PH90.
INSERT is used to form TANK-SYRUP for the following models: 452, 482, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664, 60, H60, PH61, 62, PH90.
INSERT is used to form TANK-SYRUP for the following models: 452, 482, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664, 60, H60, PH61, 62, PH90.
INSERT is used to form TANK-SYRUP for the following models: 452, 482, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664, 60, H60, PH61, 62, PH90.
INSERT is used to form TANK-SYRUP for the following models: 452, 482, 441-Jack/Box, 62/Rally's, 480, 481, 5454, 5456, 8657,8662, 8663, 8664, 60, H60, PH61, 62, PH90.

Insert Taylor #021081-1

€0,87
INSERT-PLUNGER is used to form PUMP-SYRUP for the following models: 342 DUNKIN DONUTS, 774, 8757, 430/Mr Submarine, 8662, 8663, 8664, 8781, 8756S, 8663/France w/Red Knob.
INSERT-PLUNGER is used to form PUMP-SYRUP for the following models: 342 DUNKIN DONUTS, 774, 8757, 430/Mr Submarine, 8662, 8663, 8664, 8781, 8756S, 8663/France w/Red Knob.
INSERT-PLUNGER is used to form PUMP-SYRUP for the following models: 342 DUNKIN DONUTS, 774, 8757, 430/Mr Submarine, 8662, 8663, 8664, 8781, 8756S, 8663/France w/Red Knob.
INSERT-PLUNGER is used to form PUMP-SYRUP for the following models: 342 DUNKIN DONUTS, 774, 8757, 430/Mr Submarine, 8662, 8663, 8664, 8781, 8756S, 8663/France w/Red Knob.
INSERT-PLUNGER is used to form PUMP-SYRUP for the following models: 342 DUNKIN DONUTS, 774, 8757, 430/Mr Submarine, 8662, 8663, 8664, 8781, 8756S, 8663/France w/Red Knob.
INSERT-PLUNGER is used to form PUMP-SYRUP for the following models: 342 DUNKIN DONUTS, 774, 8757, 430/Mr Submarine, 8662, 8663, 8664, 8781, 8756S, 8663/France w/Red Knob.

Insert-plunger Taylor #032758

€1,99
INSULATOR-ARMITE-2 HOLE is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
INSULATOR-ARMITE-2 HOLE is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
INSULATOR-ARMITE-2 HOLE is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
INSULATOR-ARMITE-2 HOLE is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
INSULATOR-ARMITE-2 HOLE is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
INSULATOR-ARMITE-2 HOLE is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
INSULATOR-ARMITE-2 HOLE is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
INSULATOR-ARMITE-2 HOLE is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
INSULATOR-ARMITE-2 HOLE is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.
INSULATOR-ARMITE-2 HOLE is used in the following machine models: McDonald's Intelligap Grills C832/C834/C835/C836/C838.

Insulator-armite-2 hole Taylor #079810

€3,89
Internal Tooth Lock Washer
Internal Tooth Lock Washer

Internal Tooth Lock Washer

€0,10
INTRNL 9-TUBE FB2000/1
INTRNL 9-TUBE FB2000/1

INTRNL 9-TUBE FB2000/1

€0,00
KEY-3/16 SQUARE X 1.00 is used to form GEAR UNIT for the following models: Gear Unit Assembly - Maybar, Gear Unit Assembly - Bison, Gear Unit Assembly - Valley/(GHD).
KEY-3/16 SQUARE X 1.00 is used to form GEAR UNIT for the following models: Gear Unit Assembly - Maybar, Gear Unit Assembly - Bison, Gear Unit Assembly - Valley/(GHD).
KEY-3/16 SQUARE X 1.00 is used to form GEAR UNIT for the following models: Gear Unit Assembly - Maybar, Gear Unit Assembly - Bison, Gear Unit Assembly - Valley/(GHD).
KEY-3/16 SQUARE X 1.00 is used to form GEAR UNIT for the following models: Gear Unit Assembly - Maybar, Gear Unit Assembly - Bison, Gear Unit Assembly - Valley/(GHD).
KEY-3/16 SQUARE X 1.00 is used to form GEAR UNIT for the following models: Gear Unit Assembly - Maybar, Gear Unit Assembly - Bison, Gear Unit Assembly - Valley/(GHD).
KEY-3/16 SQUARE X 1.00 is used to form GEAR UNIT for the following models: Gear Unit Assembly - Maybar, Gear Unit Assembly - Bison, Gear Unit Assembly - Valley/(GHD).

Key-3/16 square x 1.00 Taylor #007086

€1,72
Keypad Assy-Fb 80A Variable
Keypad Assy-Fb 80A Variable
Keypad Assy-Fb 80A Variable
Keypad Assy-Fb 80A Variable

Keypad Assy-Fb 80A Variable

€264,35
KIT A-REPAIR-VALVE-OLD.
KIT A-REPAIR-VALVE-OLD.
KIT A-REPAIR-VALVE-OLD.
KIT A-REPAIR-VALVE-OLD.
KIT A-REPAIR-VALVE-OLD.
KIT A-REPAIR-VALVE-OLD.

Kit a-repair-valve-old Taylor #079697

€66,49
KIT A-TUNE UP *HOOD MOUNT PUMP is used to form the 8754 model Pump-Hood Mount.
KIT A-TUNE UP *HOOD MOUNT PUMP is used to form the 8754 model Pump-Hood Mount.
KIT A-TUNE UP *HOOD MOUNT PUMP is used to form the 8754 model Pump-Hood Mount.
KIT A-TUNE UP *HOOD MOUNT PUMP is used to form the 8754 model Pump-Hood Mount.

Kit a-tune up *hood mount pump Taylor #X25350

€14,86
KIT A-TUNE UP 340 + 13116 is used for the following models: 340, 341.
KIT A-TUNE UP 340 + 13116 is used for the following models: 340, 341.
KIT A-TUNE UP 340 + 13116 is used for the following models: 340, 341.
KIT A-TUNE UP 340 + 13116 is used for the following models: 340, 341.

Kit a-tune up 340 + 13116 Taylor #X25329

€33,68
KIT A-TUNE UP is used for the following models: 142,150,152.
KIT A-TUNE UP is used for the following models: 142,150,152.
KIT A-TUNE UP is used for the following models: 142,150,152.
KIT A-TUNE UP is used for the following models: 142,150,152.

Kit a-tune up*150 - 152* Taylor #X25802

€20,65
KIT A-TUNE UP *340-1-2-3 350-01 is used for the following machines: 340,341,342,343,350,351,450.
KIT A-TUNE UP *340-1-2-3 350-01 is used for the following machines: 340,341,342,343,350,351,450.
KIT A-TUNE UP *340-1-2-3 350-01 is used for the following machines: 340,341,342,343,350,351,450.
KIT A-TUNE UP *340-1-2-3 350-01 is used for the following machines: 340,341,342,343,350,351,450.

Kit a-tune up*340-1-2-3 350-01 Taylor #X27788

€56,49
1234567891011121314